E-Juice Capacity: 5ml and 7ml
Disclosure: All of the vape products we review on this website are tested by our trained staff with years of experience. As a part of the review, Worldvaping.com links directly to the shops or brands’ website so that customers can purchase the products easily. We receive commissions from these providers and the commisions we gain help us run this website. However, this does not affect the money you pay. Worldvaping is not allowed to use by people under eighteen years old. If you are under eighteen years old, you have no access to this website. We do not offer any medical advice. Thank you.
The real question is – can it perform as well as it looks? Let’s dive deeper and see what it offers.
Inside the Box
- 1x Pre-installed 5ml Tank
- 1x 7ml Glass Tube
- 1x 0.2ohm Mesh Coil, 1x 0.3ohm Pre-installed Mesh Coil
- 8x Spare O-rings
- 1x User Manual
- 1x Warranty Card
The TBD version has a 2ml tank instead and doesn’t include the 7ml glass tube.
Composition & Design
On the top is an 810 honeycomb drip tip that matches the color of the device. The fit is very nice and snug, but still easily detachable from the rest of the device. It comes with two o-rings already pre-installed. Right below it is a top cap through which the device will be refilled.
It works on a pull & push basis, which is indicated by a tiny arrow. This also acts as a sort of a child safety mechanism, as well as to prevent accidental opening and spillage of the e-liquid.
The bottom has three relatively narrow cutouts for the airflow, which are evenly spaced out. These can be adjusted through the airflow control ring, which has an in-built stopper to lock down on each of the holes. The high polish PVD coating ensures long term smooth operation. Airflow stops are very firm – they’re modified with no hassle and stay in place once you set them up.
- Unscrew the bottom airflow piece.
- Grab the protruding part of the coil and pull.
- Align the new coil with the opening and push firmly.
- Screw the bottom back on.
As you can see, the coils are installed on a plug & play basis. One added convenience is that the side coil channels on the chimney are closed. This means that even if your tank is completely full, not a single drop will be spilled during the coil replacement.
– 0.18ohm Mesh Coil
The strongest out of the bunch, this coil is rated at 60-80W. As far as vapor production is concerned, this one is an absolute powerhouse. The 0.18ohm mesh coil offers very strong, harsh hits that won’t leave you wishing for anything else. It will drain your battery a bit faster, but it’s nothing too drastic, especially if your vaporizer has a medium-large battery capacity.
– 0.2ohm Mesh Coil
Unsurprisingly, the 0.2ohm variant provides a slightly warmer vape and somewhat richer clouds. It’s rated at 50-60W, and although the gap seems quite big compared to the 0.3ohm coil, it’s not very noticeable. This coil, too, can work very effectively even at 10W above what it’s rated at. However, if you’re trying to conserve battery life, you should stick to the lower wattages for maximum efficiency.
– 0.3ohm Mesh Coil
This is the primary coil that comes pre-installed with the device. Even though it’s rated at 35-45W, which is a reasonably low power requirement, it’s still able to perform quite well even at 5-10W above the recommended limit. Keep in mind that this is an entirely new coil family, specifically designed for the Odan, so that it won’t be compatible with any other tank.
Don’t let the seemingly low wattage turn you away. In terms of vapor production and vape warmth, it’s able to keep up with a lot of other brands that have higher requirements.
As it gets more closed and restricted, the flavors start to shine, and the hits are direct. Closing it all the way makes for a tight and warm vape, but it still retains excellent performance.
Pros and Cons
- Beautiful and stylish design
- Coils are swapped very easily
- Simple to refill
- Adjustable airflow for DTL vaping
- No leaks with the shutoff valve
- Incredible flavor and vapor production
- Low battery consumption
- It is quite bulky for a sub-ohm tank
- Somewhat weaker flavor with unrestricted airflow