One of their major accomplishment was the Orion DNA GO. With its DNA GO chipset, it was the fastest firing AIO pod mod in the market in 2018. The DNA Chipset courtesy of Evolv allowed for monitoring and customization of the pod from one’s computer. It allowed the vaper to have a say in the flavor profile, devices settings, and its memory feature enabled the replication of favorite puffs.
▶ STAR PRODUCTS BY LOST VAPE
- High quality and well design
- Affordable price
- Adjustable airflow with two slots on the bottom
- Dual 18560 with excellent battery life
- 1A balanced charging feature
- Pre-installed wire profiles
- Temperature control
- Easy to navigate menu
- Best for people who love leather
- Outstanding experience without rattle
- Vaping while charging
- Temperature control
- Firmware upgradeable
- Study battery door
- 1 Amp Charging
- A little heavy
In terms of aesthetics, this mod borrows heavily from the first Therion. It has a curved chassis, leather-wrapped battery door, wood or carbon fiber panels, and temperature control suite. But what sets it ahead of its time is its replay feature that allows for replication of favorite vape settings.
In the palms, this sleek ergonomic box mod feels good. It just weighs 340g and has a 90.5mm x 54 mm x 27 mm frame. Firing and control buttons are ergonomically designed for smooth operations. The large OLED screen displays essential vaping information such as atomizer status, battery status, temperature, ohms, and so on.
In terms of switching between various vaping modes, the chipset allows for switching between TC, VW, VV, TC-Ni, TC-Ti or TC-SS modes. It supports 0.15-1ohm resistance coil heads so you can enjoy MTL or DTL experiences.
- Durable design with high-quality material
- Max output reaches 165w
- Designed with dual 18650 battery location
- High-end DNA250C chip from Evolv
- The squonk bottles are sturdier and install easier
- It squonks nicely and without leaking
- Full temperature control
- A little expensive
- A little large for some people
Therefore, say hello to squonking with this box mod that features an in-built 7ml squonk tank. You have to press bottle then wait for about 5 minutes, so the wicks saturate and then go ahead and start vaping. It supports various coil options such as Ni200, Ti, temp-sensing, and non-sensing coils.
It comes with fully-designed VW/VV chipsets courtesy of Evolv’s DNA 250C Chipset. That allows the user to switch between favorite vaping modes. And while some may say it borrows from the original Drone BF, this new version features a large-capacity bottle for longer squonking time plus powerful batteries and advanced chipset for powerful squonking.
It’s powered by two dual external 18650 batteries that allow the chipset to fire up to 200W for powerful vaping. The replay is guaranteed with the “memory” feature that helps the Lost Vape Drone to replicate perfect puffs – the flavor and satisfaction.
Boost functionality that allows for a gradual increase of the initial vaping power when a temperature-sensitive atomizer is not in use is also possible. You can go from low to high wattage vaping as you search for unique vaping settings.
And lastly, ergonomically designed OLED display technology, 510 threads, and fire button makes it one of the most user-friendly mod in the market. The 510 thread makes it suitable for use with your favorite atomizers in the market.
- Lightweight and portable
- Unique, convenient design
- Replaceable coils
- 1000 mAh huge battery capacity
- All-in-one device
- Easily filling e-juice on top
- Leaking free for two filling slots made a tight seal
- Coil replacement easy to operate
- Three power modes
- Battery level light indicator
- Difficult to remove the top cap
The pod cartridge is smaller and meant for on the go usage. But it features improvement in terms of putting in and taking off the pods. You can fill it quickly and effortlessly, even if you’re a newbie vaper. The mesh coils allow you to use both regular vape juice and nicotine salt vape juice. It also has two coil choices as 0.6ohm Lyra mesh coil is for DTL vaping and 1.2ohm Lyra regular coil for MTL vaping.
This pod is able to store 2ml e-juice, and you can refill the pod through top filling which reduces the potential of leaking. The finish is also beautiful for its range, and the flavor doesn’t fail to disappoint. Overall, this is one you should go for as it’s a reasonable buy.
The pod is made of sturdy stainless steel. It won’t crack easily on its meeting with the floor. You can activate the pod at the push of a button, and it’s always easy to operate. What we liked best in terms of internal stuff were the safety features such as temperature protection, weak battery protection, low/high resistance protection and the much needed Short-Circuit Protection, which can spare you of a lot of headaches.
The e-liquid capacity is of 2ml, which counts as this product’s possible only disadvantage. But taking into account its modest size and 950mAh battery capacity, you can’t ask for more if you just want to have it literally in your pocket.
The Delrin drip tip is amazing, and the vaping experience is stunning, and the airflow technology gives you a kick that you rarely encounter from such a tiny device. The flavor is consistent and robust, so there is nothing to complain about when it comes to this Lost Vape Orien Q Pod Kit.
Since when did Lostvape exist?
Lost Vape was founded by Frank Guo in 2014.
What is their mission?
Lost Vape has enough patience in the road of building their unique and crafted product line with cutting-edge technology and excellent R&D team.
Their goal is to deliver an unprecedented user experience to every customer. It would be best to have all they valued and implemented embodied in their products.
What are they most proud of?
In 2018, Lost Vape made the world’s first vape pod with DNA chipset. It was called Lost Vape Orion, which continued its exclusive and high-performance design philosophy and has received an impressive response in the vape community.
Where are their production facility and office?
Production facility: Shenzhen, China;
Office: Shenzhen, China
What are their target audiences?
Lost Vape is focusing on manufacturing the high-end vape devices with the perfect combination of visually aesthetic, ergonomic, and high performance. They have manufactured many DNA series attractive products like Paranormal DNA250C TC Box Mod, Triade DNA250C TC Box Mod, and Furyan Mechanical Squonker Mod. They utilize EVOLV’s NDA chipset, carbon fiber or leather wrapped battery cover and bring high-performance during their audience.
What are they planning to do in the future?
Lost Vape said they would focus on two distinct high-quality product lines in the future. One is an ongoing collaboration with Evolv USA and some innovation devices like LYRA; another line is manufacturing the easy to use refillable pod system that takes replaceable coils.