Review

Innokin Adept&Zlide Starter Kit Review

Innokin Adept&Zlide Kit
Innokin Adept&Zlide Starter Kit side

Review Score

Size:130×43.5x30mm

Battery: Built-in 3000mAh

Disclosure: All of the vape products we review on this website are tested by our trained staff with years of experience. As a part of the review, Worldvaping.com links directly to the shops or brands’ website so that customers can purchase the products easily. We receive commissions from these providers and the commisions we gain help us run this website. However, this does not affect the money you pay. Worldvaping is not allowed to use by people under eighteen years old. If you are under eighteen years old, you have no access to this website. We do not offer any medical advice. Thank you.

Innokin Adept&Zlide Kit is the latest kit from the house of Innokin. It is a company that has been around for many years now. They have earned name and fame for being good at making vaping kits. Additionally, they also have, time & again come out with popular mods, including the likes of the proton. It is therefore quite apparent that there is quite a bit of excitement as far as this release is concerned.

The kit includes Adept mod and Zlide D22 tank. The mod works with an internal battery at a maximum wattage of 17. The Zlide tank is a quality low watt MTL tank. It comes in six different colors. The colors are white, black, ocean, sky, forest camo, and purple.

Contents

Specifications

Innokin Adept&Zlide Kit

Tank Capacity:
2ml
Wattage Output Range:
1-17W
Resistance Range:
0.4-3ohm
Thread:
510 Thread
waterproof level:
IP67

Package Contents

Included in the Kangertech Cupti Kit  box you will find:

  • 1 x Innokin Adept Battery
  • 1 x Innokin Zlide Tank
  • 1 x Micro USB Charging Cable
  • 1 x User Manual

Innokin Adept Mod

Innokin Adept&Zlide mod operates on a 2 simple button device. The first button lets you choose the mode you want. It comes with four modes as far as power is concerned. The strength of the different models is proportional to the coil resistance. If the coil is lower than OHM than the power could range from 14 to 17 watts, if the OHM of the coil is more than 1 OHM it can operate on wattage from 11 to 14.

The second button is used for firing. It requires 3-time clicking for turning the device on or off. The LED has been well designed and indicates the battery levels with three colors. They are Red, Yellow, and Green. Red means the battery level is less than 20%, yellow means 21 to 59% and green means 60% to 100%. The battery has a capacity of 3000 mah.

Further, it also has USB charging at 2A. The battery takes around 120 minutes for a full charge. It works on a single 18650 battery.

On the whole, in terms of design, quality, and overall looks, there is no doubt that the Innokin Adept&Zlide Kit is quite good. The design and the material make it feel solid and robust, and it also is quite durable. The soft and thick rubber coating is one more reason for increased durability. It also comes with a standard 510 pin, and this should be good enough to accommodate any atomizer. On the whole, there is no doubt that it is simple and basic in design that has only the required features and options. It could be a bit on the larger side, and this may or may not be liked by a few ardent fans of this brand.

Innokin Adept&Zlide Starter Kit

Design-Build & Quality

The unique thing about the Innokin Adept&Zlide kit  is that it is an internal battery mod. This makes usage quite easy. It is rated as being waterproof, however it could be at best water-resistant. The chip gets wet if the mod is put underwater for even around 15 to 20 minutes. Otherwise, the build quality and material are quite impressive.

Zenith Tank

The tank is a newer version of Zenith. It is around 22 mm in diameter and comes with a metal cage. The capacity of the tank is 2 ml, which is sufficient. This is the standard size for any MTL tank. It is slightly smaller when compared to Zenith. This zlide tanker comes with a slide back top, and it gets locked through the drip tip 510. The drip tip should be removed to fill the tank. It can be used with all 510 tips. The fill hole is sized well and also is easy to fill. It comes with two coils. Further, it also is compatible with zenith and goby coils. The flavor is quite alright and is on par with all MTL tanks.
Innokin Adept&Zlide Starter Kit side parts

Pros and Cons

Pros

  • One of the best charge rates.
  • Battery size is good with the internal build.
  • No issues with 510 pin
  • Fire button offers a pleasant and smooth click.
  • Easy to use with no complicated frills and fancies.
  • The 8-ohm coil offers a good coil life and good flavor.
  • The design is quite rugged.
  • Cross compatible coils that are not difficult to find.
  • Build quality is entirely satisfactory.
  • Six different color options
  • The tank is well designed and easy to fill.
  • Many customers feel it is a great improvement from Zenith.
  • On the whole, it offers excellent value for money.

Cons

  • A few customers have complained about the lack of power.
  • Coil life may have scope for improvement at 49 ohms and 1.6 ohms.
  • Large in size when compared to other such MTL kits.
  • Battery rating at 3000 mah may be a bit overstated.
  • It could be at best around 2500 mah.
  • Waterproof level is low.

Final Verdict

To conclude, if you are looking for a decent and reliable vaping mod with a quality tank, as a beginner, then the Innokin Adept & Zlide Kit could be the ideal choice. There are a few reasons for this. The Zlide tank is an improvement over Zenith and Zenith on its own was quite good. The four different options that it has and the six color choices that you get are also two more important takeaways. The mod could have done with a reduction in size, but on the whole, it could be a good buy.

Leave a Reply

Your email address will not be published. Required fields are marked *